PENGGUNAAN BIJI PLASTIK LOW DENSITY POLYETHYLENE (LDPE) PADA CAMPURAN BERASPAL AC - BASE
Article Sidebar
Main Article Content
Abstract
Roads are one of the key infrastructures supporting public mobility. However, road conditions in Indonesia still face various issues, one of which is the frequent occurrence of road damage even before reaching the planned service life. This damage is generally caused by the insufficient stability of asphalt mixtures, which prevents pavement layers from optimally withstanding traffic loads. One type of asphalt mixture that can address this issue is AC-Base, which functions as a supporting layer beneath the surface layer and transfers traffic loads to the subgrade. Therefore, additive materials are needed to improve the stability and durability of the AC-Base mixture. One of the additives used in this study is LDPE plastic pellets, as previous research has shown that LDPE can improve the properties of asphalt mixtures, particularly stability. However, further research is required regarding the use of LDPE plastic pellets to acknowledge the effect of the use of Low-Density Polyethylene (LDPE) plastic pellets on the characteristics of an AC-Base mixture, and to obtain the LDPE optimum content with various content levels, namely 2%, 4%, 6%, and 8% by weight of asphalt. Based on the experimental results, the LDPE plastic pellet content that met the specified criteria was 2%. The comparison between the control AC-Base mixture and the modified AC-Base mixture with 2% LDPE pellets and AC-Base mixture modified with LDPE plastic pellets on the optimum content of asphalt at 4,5% showed an increase in density from 2.33 gr/cm³ to 2.35 gr/cm³ and residual stability from 90.24% to 91.08%. However, several other parameters decreased slightly: VIM from 3.18% to 3.16%, VMA from 14.13% to 13.56%, VFB from 83.49% to 82.15%, and stability from 1856.33 kg to 1839.34 kg. This research contributes to the development of more sustainable pavement material by utilising polymer waste for asphalt mixture engineering.
Kata Kunci: AC-Base, Plastik LDPE, Stabilitas, Volumetrik Aspal, Kadar Optimum Plastik LDPE
Keywords: AC – Base, LDPE Plastic, Stability, Asphalt Volumetric, Optimum LDPE Plastic Content
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors who publish in this journal agree to the following terms:
-
Authors retain copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License, which allows others to share the work with acknowledgment of the work's authorship and initial publication in this journal.
-
Authors may enter into additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with acknowledgment of its initial publication in this journal.
-
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) as it can lead to productive exchanges, as well as earlier and greater citation of the published work.
Each submitted manuscript must be accompanied by a "Manuscript Originality Statement" and a "Copyright Transfer Statement".